Fixed oops due to incorrect build flags

docker/vpp.Dockerfile

@@ -192,27 +192,18 @@ RUN chroot /mnt/rootfs apt-get install -y --no-install-recommends \
     libxml2-dev libtclap-dev \
     && rm -rf /var/lib/apt/lists/*
 
+# Patch the callback signature in FMC source to match libxml2
+RUN set -eux; \
+    sed -i 's/const xmlError \*/xmlError */g' /src/fmc/source/FMCGenericError.h; \
+    sed -i 's/const xmlError \*/xmlError */g' /src/fmc/source/FMCGenericError.cpp;
+
 RUN set -eux; make -C source clean && \
     make -C source -j8 \
-    # Force the use of the ARM64 compiler triple if on x86 host,
-    # or ensure we pass the right machine flags
+      MACHINE=ls1046 \
       CC="aarch64-linux-gnu-gcc --sysroot=/mnt/rootfs" \
       CXX="aarch64-linux-gnu-g++ --sysroot=/mnt/rootfs" \
-    # We add -v to see exactly where the linker is looking if it fails
-    # and we point to the fmlib source directory so it finds -lfmc and -lfm
-    LDFLAGS="-L/mnt/rootfs/usr/lib/aarch64-linux-gnu \
-             -L/mnt/rootfs/lib/aarch64-linux-gnu \
-             -L/src/fmlib/lib \
-             -L/src/fmc/source" \
-    CFLAGS="-Wno-write-strings -fpermissive -DLS1046 -DNCSW_LINUX \
-      -I/mnt/rootfs/usr/include/aarch64-linux-gnu \
-      -I/mnt/rootfs/usr/include/libxml2 \
-      -I/src/fmlib/include \
-      -I/src/fmlib/include/fmd \
-      -I/src/fmlib/include/fmd/Peripherals \
-      -I/src/fmlib/include/fmd/integrations" \
-    FMD_USPACE_HEADER_PATH=/src/nxplinux/include/uapi/linux/fmd \
-    FMD_USPACE_LIB_PATH=/mnt/rootfs/usr/lib \
+      FMD_USPACE_HEADER_PATH=/mnt/rootfs/usr/include/fmd \
+      FMD_USPACE_LIB_PATH=/mnt/rootfs/usr/lib/aarch64-linux-gnu \
       LIBXML2_HEADER_PATH=/mnt/rootfs/usr/include/libxml2 \
       TCLAP_HEADER_PATH=/mnt/rootfs/usr/include
 
@@ -262,10 +253,6 @@ RUN set -eux; \
     cat << 'EOF' >> /tmp/fmc_staging/policy.xml
     <distribution name="dist_dummy">
         <protocols><protocolref name="ethernet"/></protocols>
-        <standardhash>
-            <algorithm name="fms_hash_default"/>
-        </standardhash>
-        <keycount>1</keycount>
     </distribution>
 </netpcd>
 EOF

kernel-build/dts/mono-gateway-dk-sdk.dts

@@ -252,10 +252,6 @@
 };
 
 &fsldpaa {
-    compatible = "fsl,ls1046a", "fsl,dpaa", "simple-bus";
-	dma-coherent;
-
-
 	ethernet@0 { status = "disabled"; }; /* MAC1 - not on Mono Gateway DK */
 	ethernet@2 { status = "disabled"; }; /* MAC3 - not on Mono Gateway DK */
 	ethernet@3 { status = "disabled"; }; /* MAC4 - not on Mono Gateway DK */
@@ -277,9 +273,11 @@
 	/* Add MAC10 - not in qoriq-dpaa-eth.dtsi */
     ethernet@9 {
         compatible = "fsl,dpa-ethernet-init";
+        fsl,fman-mac = <&enet7>;
         fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
-        fsl,qman-frame-queues-rx = <0x5c 1 0x5d 1>;
-        fsl,qman-frame-queues-tx = <0x7c 1 0x7d 1>;
+        fsl,qman-frame-queues-rx = <0x5e 1 0x5f 1>;
+        fsl,qman-frame-queues-tx = <0x7e 1 0x7f 1>;
+        dma-coherent;
     };
 };
 

vpp/start-vpp.sh

@@ -17,20 +17,7 @@ for port in $SFP_PORTS; do
     fi
 done
 
-# 1. PRE-REQUISITE: Unbind ports from the kernel
-# This frees the hardware so FMC/VPP can claim it.
-# MAC 3 usually maps to fm0-port.3 or similar in sysfs.
-echo "Releasing hardware ports from kernel..."
-for port in 3 4 5 6 9 10; do
-    # Try to unbind from the DPAA Ethernet driver if it exists
-    if [ -e /sys/bus/platform/drivers/fsl-dpa-ethernet/fm0-port.$port ]; then
-        echo "fm0-port.$port" > /sys/bus/platform/drivers/fsl-dpa-ethernet/unbind 2>/dev/null || true
-    fi
-    # Ensure the interface is DOWN
-    # Note: You may need to map MAC numbers to eth names (eth0, eth1, etc.)
-done
-
-# 2. Run FMC
+# Run FMC
 if [ -f /etc/fmc/config.xml ]; then
     echo "Applying FMC Configuration..."
     cd /etc/fmc