# monok8s

Kubernetes image for Mono Gateway Development Kit

https://docs.mono.si/gateway-development-kit/getting-started

## DISCLAIMER
I used ChatGPT a lot for this. I also tested them thoroughly enough that until confident that's what we need.

### The device's dts files are located at here
https://github.com/we-are-mono/OpenWRT-ASK/tree/mono-25.12.0-rc3/target/linux/layerscape/files/arch/arm64/boot/dts/freescale
* We need both `mono-gateway-dk-sdk.dts` and `mono-gateway-dk.dts` since the sdk one includes the non-sdk one.
* The actual dts being used is the `mono-gateway-dk-sdk.dts`


## Build

To avoid frequent downloading on rebuild. Find the latest packages and update build.env
 * [kernel](https://github.com/nxp-qoriq/linux/archive/refs/tags/)
 * [busybox](https://github.com/mirror/busybox/archive/refs/tags/)
 * [CRI-O](https://github.com/cri-o/cri-o/releases)
 * [Kubelet](https://kubernetes.io/releases/download/)

Then run
```
make download-packages
```

```bash
make itb # for out/board.itb (contains the kernel and the initramfs)
make release # WORK IN PROGRESS
```

## Architecture
 - A/B deployment
 - Read-only OS

## Upgrade process
Rough idea

```bash
./configure
# - asks for some config for kubelet
# - Join a cluster? Start a cluster?

make release

# Copy the new image to the upgrade-scheduler
kubectl cp -n kube-system upgrade-scheduler:/tmp/upgrade.img

# Upgrade scheduler reads the file that issue a self-reboot
reboot

# uboot to boot into partition B

```

```yaml
PENDING
```

## tftp (network is required)
```
setenv ipaddr 10.0.0.153
setenv serverip 10.0.0.129
tftp 0x80000000 board.itb
```

## USB
```
usb start
usb tree
fatls usb 0:1   # For fat
ext4ls usb 0:1  # For ext4
fatload usb 0 0x80000000 board.itb

setenv bootargs "console=ttyS0,115200 earlycon=uart8250,mmio,0x21c0500 root=/dev/ram0 rootwait rw"
bootm 0x80000000
```